The control room at Incubator studios already had some polyester built in panelling that wasn’t quite doing the job. Initial measurements revealed some significant “lumpiness” below 200Hz so we decided to install some of the BT600/150 bass traps in some of the available ceiling corners. This is where the staple gun channels in the BT600/150 come in very handy. After the initial treatment the room was greatly improved, with Adrian noticing an immediate improvement. Post measurements revealed a flatter response, but there was still a persistent dip at 180Hz. As a trial we loaded the rear wall with 6 x BT600/150 which totally dealt with the issue. It’s always nice when the first option works!